Key Fob Replacement Batteries

Battery Changing Instructions

• Lucas 3TXA, 3TXB, 3TXC, 17TN (2 Button remote)
• Original Lucas Land Rover Single Button Key Fob
• Remote Key Replacement Land Rover Single Button Key Fob
• Rover / Honda RF Valeo
• Rover / Honda Infrared
• Range Rover P38
• Huge Lion Land Rover Replacement Key Fob (Foreign Frequency's)

Lucas 3TXA, 3TXB, 3TXC, 17TN

When changing the battery in this key fob you must follow this procedure:

1. Open the key fob case.
2. Remove the old battery carefully.
3. Press both of the buttons one at a time for at least 10 seconds.
4. Fit the new battery, positive "+" side facing upwards.
5. Reassemble the two halves of the key fob.
6. Press the lock button (the right hand button) 4 to 8 times next to the vehicle the press the left hand button once.

Back to top

---

Original Lucas Land Rover Single Button Key Fob

When changing the battery in this key fob follow this procedure:

1. Open the key fob case.
2. Remove the old batteries.
3. Fit the new batteries, positive "+" side facing upwards.
4. Reassemble the key fob.
5. Press the button three times next to the vehicle and the key fob will work normally.

Back to top

---

Remote Key Replacement Land Rover Single Button Key Fob

When changing the battery in this key fob follow this procedure:

1. Open the key fob case. A small cross head screwdriver will be required.
2. Remove the old batteries.
3. Fit the new batteries.
4. Reassemble the key fob.
5. Press the button three times next to the vehicle and the key fob will work normally.

Back to top

---

Rover / Honda RF Valeo

No special instructions are needed to fit a battery to this remote.

Back to top

---

Rover / Honda Infrared

No special instructions are needed to fit a battery to this remote.

Back to top

---

Range Rover P38

Please follow the procedure in your owners handbook to replace the battery for this key fob.

Back to top

---

Huge Lion Land Rover Replacement Key Fob (Foreign Frequency's)

When changing the battery in this key fob follow this procedure:

1. Open the key fob case.
2. A small cross head screwdriver will be required.
3. Remove the old battery.
4. Fit the new battery.
5. Reassemble the key fob.
6. Press the button three times next to the vehicle and the key fob will work normally.

Back to top